Certify your ELD logs

This article describes how to view uncertified logs, how to certify your logs from the Status Log screen or from an alert, and how to recertified logs.

Note:

  • As per regulations, we recommend that you certify your logs daily.

  • Your administrator can make changes to your logs only if you have certified your logs.

  • When your logs change because you accept carrier edits or unidentified miles, you must recertify those logs.

View uncertified logs

The app alerts you about uncertified logs. To view these logs:

  1. In the app header, tap the alerts img-en-us-lb_alert_icon32.png icon.

  2. Select the Uncertified Logs tab. If you are on a mobile phone, you need to swipe left on the tabs to see the Uncertified Logs tab. A list of uncertified logs is displayed:

    img-en-us-lb_uncertified_logs.png
  3. Tap Review to go to the Status Log screen for more details.

  4. Tap Certify to certify your log for the specified day. When certifying a log, you are asked to enter an optional comment and agree to the certification statement.

Swipe down on the screen to refresh the list of uncertified logs.

Certify your logs from the Status Log screen

On the Status Log screen, you can view and certify logs from the previous six months.

  1. In the navigation bar, in the lower part of the screen, tap Logs. The following screen is displayed:

    img-en-us-lb_status_log_with_events.png
  2. The yellow CERTIFY button appears only for dates that are uncertified or that you have edited.

  3. To change the displayed date, tap the calendar LOGS2.png icon.

    Select the date you want to view.

  4. If that date has uncertified logs, tap CERTIFY.

  5. In the Certify [Date] box, enter a comment if required. Tap AGREE.

    img-en-us-lb_certify_log_pop_up.png
  6. In the confirmation box, tap OK.

  7. After certifying a log, the yellow CERTIFY button is replaced by a green Certified status.

    img-en-us-lb_logs_certified_icon.png

If you have uncertified logs, the dates with the uncertified logs are indicated on the calendar in red:

img-en-us-lb_certify_logs_calendar.png

Certify logs from alerts

The app alerts you about uncertified logs. To certify these logs:

  1. In the app header, tap the alerts img-en-us-lb_alert_icon32.png icon.

  2. Select Uncertified Logs tab. If you are on a mobile phone, you need to swipe left on the tabs to see the Uncertified Logs tab. A list of days with uncertified logs is displayed:

    img-en-us-lb_uncertified_logs.png
  3. Optionally, tap Review to go to the Status Log screen for more details.

  4. Tap Certify to certify your log for the specified day.

  5. In the Certify [Date] box, enter a comment if required. Tap AGREE.

    img-en-us-lb_certify_log_pop_up.png
  6. In the confirmation box, tap OK.

  7. The log is now certified.

Recertify a log

If any changes are made to a log entry, you must recertify it.

You recertify logs in the same way that you certify logs. However, you must enter a comment when you recertify logs.


Was this article helpful?


39 out of 64 found this helpful